How automation increases solar self-consumption
Automation does not increase what the panels produce — it shifts consumption into the hours when the electricity is your own. Load priorities, the water tank as heat storage and charging a car with surplus.

Why self-consumption matters more than array size
Solar produces most in the middle of the day, when most houses are empty. Energy exported to the grid comes back on less favourable terms than energy used on site — so the real bill is decided less by the size of the array than by the share of production consumed directly in the building.
And that is exactly where automation gives the most measurable result: it does not increase production, but it shifts consumption into the hours when the electricity is your own.
Load priorities — the heart of the whole logic
The system knows current production and current consumption, so it knows how many kilowatts are “free” at any moment. It hands the surplus out in a set order — and that order is the whole secret of how this works.
- Domestic hot water — the cheapest storage you already have in the house
- Heat pump — topping up or pre-cooling the buffer during production hours
- Car charging — draws exactly what is left over
- Battery storage — only what the loads above do not take
- Pool, driveway heating, dehumidifiers — anything that can wait for the sun
The water tank as the cheapest energy storage
Before you cost out battery storage, look at the water tank. An immersion heater in the hot water cylinder turns surplus into heat with no additional investment — the tank is already in the building. It is the simplest way to stop midday production going back to the grid.
The order is usually this: first use what you already have — the water tank and the buffer. Then consider a battery. The reverse order costs considerably more for a similar result.
Charging a car with surplus
A wallbox connected to the system stops being an ordinary socket with a fixed power rating. It is told how much surplus is available and adjusts the charging current dynamically — the car charges more slowly, but in practice for free. In the evening, if it has to be ready in the morning, the logic switches to normal charging from the grid.
In our project in Kraków the solar array, the battery storage and the wallbox run in one system together with underfloor heating, air conditioning and ventilation — so surplus goes wherever it makes the most sense at that moment.
Battery storage — when it genuinely pays
A battery makes sense once you have used the cheaper ways of shifting consumption and surplus still goes back to the grid regularly. It then holds energy for the evening and night, and with the right configuration provides backup power as well. Without integration into the rest of the building, though, it works in isolation from what is actually happening there.
What you need for this to work
There is one condition, and it is a hard one: the system has to measure. Without reliable production and consumption data, no priority logic has anything to work with — it will be guessing.
- Production metering from the inverter — read over the bus, not from the manufacturer’s cloud
- Consumption metering at the main switchboard, ideally split by circuit
- Loads the system can control, not merely observe
- Local logic on the server — decisions in seconds, regardless of the connection
Already have solar and want to get more out of it? Tell us what is in the building — we will say what can be integrated without replacing hardware. Have a look at our projects with energy management too.
What stage are you at? We will review the design and tell you what can still be done.
To the configurator